Lowering Hardware

C5 Corvette Lowering Bolt Package | 1997–2004

Complete front and rear lowering bolt package for 1997–2004 C5 Corvettes. Replaces rear spring end bolts and adjusts front ride height — no spring swap required.

$124.99

Lowering Hardware

C5 Corvette Lowering Bolts — Rear Only | 1997–2004

Rear-only lowering bolt kit for 1997–2004 C5 Corvettes. Drops the rear stance for a lower, meaner look without cutting springs.

$74.99

Lowering Hardware

C5 Corvette Lowering Bolts — Front Only | 1997–2004

Front lowering bolt kit for 1997–2004 C5 Corvettes. Lowers the center of gravity for improved handling and a sportier stance.

$66.61

Lowering Hardware

C6 Corvette Lowering Bolts — Front & Rear | 2005–2013

Complete front and rear lowering bolt set for 2005–2013 C6 Corvettes including Z06, ZR1, and Grand Sport. Drop the stance and sharpen handling in one kit.

$112.99

Ride Height

C7 Corvette Stock Ride Height Adjusting Bolts | 2014–2019

Reproduction stock-size ride height adjusting bolts for 2014–2019 C7 Corvettes. Available as a pair or full set of four. Fits Stingray, Z51, Z06, Grand Sport, and ZR1.

From $86.27

Ride Height

C6 Corvette Stock Ride Height Adjusting Bolts | 2005–2013

Replacement stock ride height adjusting bolts for 2005–2013 C6 Corvettes. Available as a pair or full set of four for a complete refresh.

From $86.27

Lowering Springs

Eibach Pro-Kit Lowering Springs | C5 Corvette 1997–2004

Premium lowering springs for 1997–2004 C5 and Z06 Corvettes. Lowers ride height, tightens cornering, and maintains a comfortable daily-driven ride. Uses modified hardware (not springs alone).

$188.99

Lowering Springs

Eibach Pro-Kit Lowering Springs | C6 Corvette 2005–2013

Performance lowering springs for 2005–2013 C6 Corvettes including Z06 and Grand Sport. Reduces body roll and improves cornering grip while keeping the ride street-friendly.

$188.99

Lowering Springs

Eibach Pro-Kit Lowering Springs | C8 Corvette 2020–2022

Purpose-built lowering springs for the mid-engine 2020–2022 C8 Stingray 6.2L V8. Lowers the stance aggressively while preserving the C8's exceptional factory handling balance.

$589.99

Shock Absorbers

Bilstein B6 Front Monotube Shock | C2–C3 Corvette 1963–1982

36mm monotube shock absorber for 1963–1982 C2 and C3 Corvettes. B6 performance level is a direct OE upgrade — improved damping with street-friendly compliance.

$154.99

Shock Absorbers

Bilstein B6 Rear Monotube Shock | C2–C3 Corvette 1963–1982

46mm rear monotube shock for 1963–1982 C2 and C3 Corvettes. Restores and upgrades rear damping — ideal paired with the matching front unit for a balanced setup.

$142.99

Shock Absorbers

Bilstein B8 Front Monotube Shock | C4 Corvette 1989–1994

B8 Performance Plus 46mm front shock for 1989–1994 C4 Corvettes (including 40th Anniversary Edition). Designed to be paired with aftermarket lowering springs for a performance-tuned setup.

$166.99

Shock Absorbers

Bilstein B6 Front Monotube Shock | C4 Corvette 1995–1996

46mm front monotube shock for 1995–1996 C4 Corvettes including Grand Sport, Indianapolis 500 Pace Car, and Collector's Edition. Bolt-in OE upgrade.

$166.99

Shock Absorbers

Bilstein B8 Front Monotube Shock | C5–C6 Corvette 1997–2013

B8 Performance Plus front shock for 1997–2013 C5 and C6 Corvettes including Z06, ZR1, Grand Sport, and 50th Anniversary Edition. Pairs perfectly with Eibach lowering springs.

$192.99

Shock Absorbers

Bilstein B8 Front Monotube Shock | C7 Corvette 2014–2019

B8 46mm front shock for 2014–2019 C7 Corvettes. Fits Stingray, Z06, and Grand Sport. Performance Plus damping tuned specifically for the C7's suspension geometry.

$123.99

Coilover System

QA1 Front Pro-Coilover — Double Adj. 450 lb/in | C5–C6 1997–2013

Double-adjustable aluminum front coilover shock for 1997–2013 C5 and C6 Corvettes including Z06 and ZR1. 8-inch travel, 450 lb/in spring rate — converts leaf spring to coilover for full suspension tunability.

$1,614.99

Coilover System

QA1 Front Pro-Coilover — Double Adj. 550 lb/in | C5–C6 1997–2013

Higher spring rate 550 lb/in front coilover for 1997–2013 C5 and C6 Corvettes. Stiffer setup ideal for track use and autocross where maximum cornering stiffness is the priority.

$1,614.99

Coilover System

QA1 Rear Pro-Coilover — Double Adj. 450 lb/in | C5–C6 1997–2013

Double-adjustable rear coilover conversion for 1997–2013 C5 and C6 Corvettes. Eliminates the factory transverse leaf spring for fully independent rear suspension tunability. Pair with the front kit for the complete system.

$1,614.99

Sway Bar Upgrades

Hotchkis Front & Rear Sway Bar Endlink Set | C5–C7 1997–2017

Upgraded Hotchkis sway bar endlinks for 1997–2017 C5, C6, and C7 Corvettes. Reduces body roll and improves cornering feel with a direct bolt-in installation.

$539.99

Bushings

Rear Control Arm Bushing Set — Red or Black | C5–C6 1997–2012

Polyurethane control arm bushing set for 1997–2012 C5 and C6 Corvettes. Available in red or black, front or rear. Restores suspension feel and eliminates slop from worn rubber bushings.

From $119.99

Ball Joints

Corvette Ball Joints — Multiple Options | C5–C6 1997–2013

Replacement ball joints for 1997–2013 C5 and C6 Corvettes. Available as upper pair, lower pair, 4-piece set, or full 8-piece complete set. Eliminates sloppy, worn suspension feel.

From $71.99

Performance Hardware

HPI Transmission Differential Brace | C5 Corvette 1997–2004

Eliminates drivetrain shake on 1997–2004 C5 Corvettes. This brace ties the transmission and differential together to reduce flex and improve power delivery feel through the drivetrain.

$335.99

Sway Bar Hardware

Sway Bar End Links — Front or Rear | C5–C6 1997–2013

Replacement sway bar end links for 1997–2013 C5 and C6 Corvettes. Available in front or rear configuration (sold as a pair). Restores proper sway bar function and handling sharpness.

$71.99

Lowering Kit

C4 Corvette Lowering Kit — Made in USA | 1984–1996

American-made lowering kit for 1984–1996 C4 Corvettes. Drops ride height for a sportier stance and improved handling. Easy bolt-in installation.

$91.99

Bushing Kits

Energy Suspension Hyper-Flex Master Bushing Set | C2–C3 1963–1982

Complete polyurethane master bushing set for 1963–1982 C2 and C3 Corvettes. Replaces every suspension bushing in one kit — available in black or red. The ultimate suspension refresh.

$577.99

Shock Absorbers

Monroe Matic Plus Rear Shocks | C3 Corvette 1968–1982

Monroe Matic Plus rear shocks for 1968–1982 C3 Corvettes. OEM-specification replacement that restores ride quality and handling to factory feel.

$61.99

Strut Rods

Adjustable Strut Rod Set W/Polyurethane Bushings | C2–C3 1963–1979

Adjustable front strut rods with polyurethane bushings for 1963–1979 C2 and C3 Corvettes. Allows fine-tuning of front suspension geometry beyond stock — great for lowered setups.

From $274.99

Leaf Springs

Eaton Detroit 25-Inch Rear 10-Leaf Spring | C3 Coupe 1976–1979

SAE 5160 steel rear leaf spring for 1976–1979 C3 Coupe. Exact OEM replacement made by Eaton Detroit Springs — restores factory ride height and suspension geometry.

$922.99

Sway Bar Hardware

Sway Bar Links W/Urethane Bushings | C2–C3 1963–1982

Replacement front sway bar links with urethane bushings for 1963–1982 C2 and C3 Corvettes. Restores front sway bar function to factory specification.

$31.99

Shock Absorbers

Monroe Shock Absorbers — Multiple Options | C4 Corvette 1984–1996

Monroe replacement shocks for 1984–1996 C4 Corvettes. Choose front, rear, or front-and-rear set for 1984–1987 or 1989–1996 fitment. OEM-quality ride restoration.

From $116.99

Show & Display

C8 Corvette Perforated Shock Tower Cover Inserts W/Chrome Cap | 2020–2026

Polished perforated stainless steel shock tower inserts with chrome cap for 2020–2026 C8 Corvettes. Fits Stingray, Z06, and E-Ray. Dress up one of the C8's most uniquely visible front-end components.

$183.99