Remove all the dents in your Corvette today in a flash with our new hot gun dent repair kit. Our kit has 7 different size tabs so you to find that perfect size to remove your dent, and the most important thing is our kit is a time saver. It will eliminate you traveling to your local body repair, spend the time and money there having them repaint your Corvette. This repair kit is a great DIY project that can be done in about 30 minutes.
- Clean the dent with a clean wet cloth, mark the dent with marking pen.
- Mount the glue stick into the glue gun, pull the trigger to let the glue stick enter into the glue gun, plug in the power and preheat for about 5 minutes.
- Select the correct tab according to the area of the dent, apply the drawing gasket with extruded glue.
- Immediately place the drawing gasket with hot melt glue at the center of dent, press lightly until the glue cures and adheres (Cooling the glue for 8 minutes. The cooling time should be less than 10 minutes and shorter slightly in winter).
- Align the dent puller bridge stand through hole and knob the screw to pull the sliding rod backwards to pull up the dent, continually tighten knob until dent repaired, spray alcohol on the glue, peel off the dent removal tool with plastic scraper to check dent repaired condition, repeat the steps to remove the dent more perfectly.
- Spray alcohol on the residual glue, remove it with glue scraper, clean the repaired place with a clean wet cloth.
- 1 x PDR Dent Puller Bridge Stand.
- 1 x Dent Puller Screw.
- 7 x Dent Puller Tabs.
- 1 x Hot Melt Glue Gun.
- 10 x Glue Sticks.
- 1 x Plastic Glue Scraper.
- 1 x Alcohol Spray Bottle.
- Associated Years: 1953-2023